Air & Electric Shifter
Activators and
Throttle Controllers

Shifnoid Product Line Contact Tech Help - Shifnoid Diagrams Shifnoid Dealers Home/Main
A Leader In Drag Racing Technology
• SHIFNOID PRODUCT LINE •



Engine and Racing Accessories



PC3000
$ 79.99

PC3000 Engine Lean Out Kit: $79.99
Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake manifold or carburetor spacer with the included “Push to Connect” fittings, 10' X 1/2" Air line and Industrial grade Valve. 3/8" NPT fittings can be adapted to existing ports if needed.

 

 

 



PC3100
$ 94.99

PC3100 Engine Leanout Kit w / Bracket: $94.99
This model includes a heavy duty aluminum bracket. Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake manifold or carburetor spacer with the included “Push to Connect” fittings, 10' X 1/2" Air line and Industrial grade Valve. 3/8" NPT fittings can be adapted to existing ports if needed.

 

 

 



PC4000
$379.99

AIR COMPRESSOR, 12 Volt: $379.99

ELIMINATE YOUR CO2 BOTTLE AND REGULATOR
Mounted in your vehicle, it replaces your CO2 Bottle and regulator. No more filling and maintaining your bottle. Run your Air shifter, Starting Line Controller, Throttle stop and other CO2 / Air devices that operate in the range of 90-120 PSI. This includes most all devices currently used in racing and off road applications.

Includes a "No Kink" Polyurethane coiled hose and tire chuck to maintain your tire pressure, eliminating the need to haul your portable air tank.

Unlike many 12 volt compressors on the market, our customized unit has a 1/4 gallon recovery tank to supply that volume needed to activate many Air devices used in racing.

Compact size, approximately 10" x 7" x 4" and net weight of only 10 lbs.

Included are the following:
• 8 outlet ports to connect virtually any device used in racing and off road.
• Pre Installed safety valve
• Drain Cock to eliminate moisture
• Oil less design allows mounting at just about any angle
• 90-120 PSI Pressure switch. Recovery time of approximately 4 seconds.
• 2.30 cfm @ 0 lbs. - 1.28 cfm @ 90 lbs.
• 40 Amp relay
• Cleanable, remote mount air intake
• Quick connect coupler for coiled air line to fill tires.

NC6200
$ 199.99
Bump Box Staging Controller: $199.99
The addition of an Outlaw Bump Box, allows for a smooth transition during the drag-strip staging process. Critical to cars that need to rev up before final staging such as turbo cars but also used by many non turbo bracket racers. Being able to slide through the pre-stage beams and into the staged beams with precise tuning, cuts down on rocking, bumping and red-light starts. This box is easy to use. Simple adjustments can be made to accommodate different tracks, power levels and rpms. This one touch operation, results in better focus, consistent launching, and better reaction times.

With the included relay the box will interrupt either the positive or negative wire on the Trans-Brake solenoid. When the Bump button is released ( not included ), it starts the timer, opens the relay, then closes the relay when the timer times out. The amount of time determines the “bump” distance.



HOME :: Shifnoid Dealers :: Product Line :: Contact Tech Help & Diagrams :: Email This Page


Copyright ©2019, Shifnoid.com